ZyXEL Communications ZYWALL USG 20 Manual page 209

Table 44 Monitor > Log (continued)
LABEL
Priority
Category
Message
Source
Destination
Note
The Web Configurator saves the filter settings if you leave the View Log screen
and return to it later.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
This field displays the priority of the log message. It has the same range
of values as the Priority field above.
This field displays the log that generated the log message. It is the same
value used in the Display and (other) Category fields.
This field displays the reason the log message was generated. The text
"[count=x]", where x is a number, appears at the end of the Message
field if log consolidation is turned on (see Log Consolidation in
212 on page 685) and multiple entries were aggregated to generate into
this one.
This field displays the source IP address and the port number in the
event that generated the log message.
This field displays the destination IP address and the port number of the
event that generated the log message.
This field displays any additional information about the log message.
Chapter 9 Monitor
Table
209