Ip/Mac Binding Exempt List - ZyXEL Communications ZYWALL USG 20 Manual

Table 101 Configuration > Network > IP/MAC Binding > Edit > Add (continued)
LABEL
MAC Address
Description
OK
Cancel

20.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the
IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP
addresses to which the ZyWALL does not apply IP/MAC binding.
Figure 220 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 102 Configuration > Network > IP/MAC Binding > Exempt List
LABEL
Add
Edit
Remove
#
Name
Start IP
End IP
Add icon
Apply
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Enter the MAC address of the device to which the ZyWALL assigns the
entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer's owner.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to create a new entry.
Click an entry or select it and click Edit to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you
want to remove it before doing so.
This is the index number of the IP/MAC binding list entry.
Enter a name to help identify this entry.
Enter the first IP address in a range of IP addresses for which the ZyWALL
does not apply IP/MAC binding.
Enter the last IP address in a range of IP addresses for which the ZyWALL
does not apply IP/MAC binding.
Click the Add icon to add a new entry.
Click the Remove icon to delete an entry. A window displays asking you to
confirm that you want to delete it.
Click Apply to save your changes back to the ZyWALL.
Chapter 20 IP/MAC Binding
363