Chapter 38 Authentication Method
Select Server Mode and select an authentication method object from the drop-
3
down list box.
Click OK to save the settings.
4
Figure 346 Example: Using Authentication Method in VPN
38.2 Authentication Method Objects
Click Configuration > Object > Auth. Method to display the screen as shown.
Note: You can create up to 16 authentication method objects.
Figure 347 Configuration > Object > Auth. Method
The following table describes the labels in this screen.
Table 175 Configuration > Object > Auth. Method
LABEL
Add
Edit
Remove
Object
References
#
Method Name This field displays a descriptive name for identification purposes.
584
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that shows
which settings use the entry. See
example.
This field displays the index number.
Section 11.3.2 on page 232
ZyWALL USG 20/20W User's Guide
for an