Object References - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 11 Interfaces
Table 51 Configuration > Network > Interface > Ethernet > Edit (continued)
LABEL
Overwrite
Default MAC
Address
Related Setting
Configure
PPPoE/PPTP
OK
Cancel

11.3.2 Object References

When a configuration screen includes an Object References icon, select a
configuration object and click Object References to open the Object
References screen. This screen displays which configuration settings reference
the selected object. The fields shown vary with the type of object.
Figure 161 Object References
The following table describes labels that can appear in this screen.
Table 52 Object References
LABEL
Object Name
#
232
DESCRIPTION
Select this option to have the interface use a different MAC address.
Either enter the MAC address in the fields or click Clone by host and
enter the IP address of the device or computer whose MAC you are
cloning. Once it is successfully configured, the address will be copied
to the configuration file. It will not change unless you change the
setting or upload a different configuration file.
Click PPPoE/PPTP if this interface's Internet connection uses PPPoE
or PPTP.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
DESCRIPTION
This identifies the object for which the configuration settings that use it
are displayed. Click the object's name to display the object's
configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
ZyWALL USG 20/20W User's Guide