ZyXEL Communications ZYWALL USG 20 Manual page 779

Table 254 Connectivity Check Logs (continued)
LOG MESSAGE
Can't get MAC address
of %s interface!
To send ARP REQUEST
error!
The %s routing status
seted to DEAD by
connectivity-check
The %s routing status
seted ACTIVATE by
connectivity-check
The link status of %s
interface is inactive
Table 255 Routing Protocol Logs
LOG MESSAGE
RIP on all interfaces
have been stopped
Invalid RIP md5
authentication
Invalid RIP text
authentication.
RIP on interface %s
has been activated.
RIP direction on
interface %s has been
changed to In-Only.
RIP direction on
interface %s has been
changed to Out-Only.
RIP authentication
mode has been changed
to %s.
RIP text
authentication key has
been changed.
RIP md5 authentication
id and key have been
changed.
RIP global version has
been changed to %s.
RIP redistribute OSPF
routes has been
enabled.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
The connectivity check process can't get MAC address of
interface.
%s: interface name
The connectivity check process can't send ARP request
packet.
The interface routing can't forward packet.
%s: interface name
The interface routing can forward packet.
%s: interface name
The specified interface failed a connectivity check.
DESCRIPTION
Got the CLI command 'no router rip' to shut down RIP on all
interfaces
RIP md5 authentication has been set without setting md5
authentication id and key first
RIP text authentication has been set without setting
authentication key first
RIP on interface %s has been activated. %s: Interface Name
RIP direction on interface %s has been changed to In-Only.
%s: Interface Name
RIP direction on interface %s has been changed to Out-Only.
%s: Interface Name
RIP authentication mode has been changed to text or md5.
RIP text authentication key has been changed.
RIP md5 authentication id and key have been changed.
RIP global version has been changed to version 1 or 2.
RIP redistribute OSPF routes has been enabled.
Appendix A Log Descriptions
779