ZyXEL Communications ZYWALL USG 20 Manual page 598

Chapter 39 Certificates
Table 178 Configuration > Object > Certificate > My Certificates > Add (continued)
LABEL
Request
Authentication
OK
Cancel
If you configured the My Certificate Create screen to have the ZyWALL enroll a
certificate and the certificate enrollment is not successful, you see a screen with a
Return button that takes you back to the My Certificate Create screen. Click
Return and check your information in the My Certificate Create screen. Make
sure that the certification authority information is correct and that your Internet
connection is working properly if you want the ZyWALL to enroll a certificate
online.
598
DESCRIPTION
When you select Create a certification request and enroll for a
certificate immediately online, the certification authority may
want you to include a reference number and key to identify you
when you send a certification request.
Fill in both the Reference Number and the Key fields if your
certification authority uses the CMP enrollment protocol. Just the
Key field displays if your certification authority uses the SCEP
enrollment protocol.
For the reference number, use 0 to 99999999.
For the key, use up to 31 of the following characters. a-zA-Z0-
9;|`~!@#$%^&*()_+\{}':,./<>=-
Click OK to begin certificate or certification request generation.
Click Cancel to quit and return to the My Certificates screen.
ZyWALL USG 20/20W User's Guide