ZyXEL Communications ZYWALL USG 20 Manual page 699

Table 216 Maintenance > File Manager > Configuration File (continued)
LABEL
Apply
#
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Use this button to have the ZyWALL use a specific configuration file.
Click a configuration file's row to select it and click Apply to have the
ZyWALL use that configuration file. The ZyWALL does not have to restart
in order to use a different configuration file, although you will need to
wait for a few minutes while the system reconfigures.
The following screen gives you options for what the ZyWALL is to do if it
encounters an error in the configuration file.
Figure 419 Maintenance > File Manager > Configuration File >
Apply
Immediately stop applying the configuration file - this is not
recommended because it would leave the rest of the configuration blank.
If the interfaces were not configured before the first error, the console
port may be the only way to access the device.
Immediately stop applying the configuration file and roll back to
the previous configuration - this gets the ZyWALL started with a fully
valid configuration file as quickly as possible.
Ignore errors and finish applying the configuration file - this
applies the valid parts of the configuration file and generates error logs
for all of the configuration file's errors. This lets the ZyWALL apply most
of your configuration and you can refer to the logs for what to fix.
Ignore errors and finish applying the configuration file and then
roll back to the previous configuration - this applies the valid parts
of the configuration file, generates error logs for all of the configuration
file's errors, and starts the ZyWALL with a fully valid configuration file.
Click OK to have the ZyWALL start applying the configuration file or click
Cancel to close the screen
This column displays the number for each configuration file entry. This
field is a sequential value, and it is not associated with a specific
address. The total number of configuration files that you can save
depends on the sizes of the configuration files and the available flash
storage space.
Chapter 45 File Manager
699