Time Server Synchronization - ZyXEL Communications ZYWALL USG 20 Manual

43.4.2 Time Server Synchronization

Click the Synchronize Now button to get the time and date from the time server
you specified in the Time Server Address field.
When the Please Wait... screen appears, you may have to wait up to one minute.
Figure 370 Synchronization in Process
The Current Time and Current Date fields will display the appropriate settings if
the synchronization is successful.
If the synchronization was not successful, a log displays in the View Log screen.
Try re-configuring the Date/Time screen.
To manually set the ZyWALL date and time.
Click System > Date/Time.
1
Select Manual under Time and Date Setup.
2
Enter the ZyWALL's time in the New Time field.
3
Enter the ZyWALL's date in the New Date field.
4
Under Time Zone Setup, select your Time Zone from the list.
5
As an option you can select the Enable Daylight Saving check box to adjust the
6
ZyWALL clock for daylight savings.
Click Apply.
7
To get the ZyWALL date and time from a time server
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
As an option you can select the Enable Daylight Saving check box to adjust the
4
ZyWALL clock for daylight savings.
ZyWALL USG 20/20W User's Guide
Chapter 43 System
635