Vantage Cnm - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 43 System
Table 207 Configuration > System > SNMP (continued)
LABEL
Add
Edit
Remove
Move
#
Zone
Address
Action
Apply
Reset

43.12 Vantage CNM

Vantage CNM (Centralized Network Management) is a browser-based global
management solution that allows an administrator from any location to easily
configure, manage, monitor and troubleshoot ZyXEL devices located worldwide.
See the Vantage CNM User's Guide for details.
If you allow your ZyWALL to be managed by the Vantage CNM server, then you
should not do any configurations directly to the ZyWALL (using either the Web
Configurator or commands) without notifying the Vantage CNM administrator.
674
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to create a
new entry after the selected entry. Refer to
details on the screen that opens.
Double-click an entry or select it and click Edit to be able to modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so. Note that subsequent entries
move up by one when you take this action.
To change an entry's position in the numbered list, select the method and
click Move to display a field to type a number for where you want to put
it and press [ENTER] to move the rule to the number that you typed.
This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL's (non-
configurable) default policy. The ZyWALL applies this to traffic that does
not match any other configured rule. It is not an editable rule. To apply
other behavior, configure a rule that traffic will match so the ZyWALL will
not have to use the default policy.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Table 201 on page 650
ZyWALL USG 20/20W User's Guide
for