ZyXEL Communications ZYWALL USG 20 Manual page 188

Chapter 9 Monitor
Table 31 Monitor > System Status > Session Monitor (continued)
LABEL
User
Service
Source
Destination
Search
Active
Sessions
Show
User
Service
Source
Destination
Rx
Tx
Duration
188
DESCRIPTION
This field displays when View is set to all sessions. Type the user
whose sessions you want to view. It is not possible to type part of the
user name or use wildcards in this field; you must enter the whole user
name.
This field displays when View is set to all sessions. Select the service
or service group whose sessions you want to view. The ZyWALL identifies
the service by comparing the protocol and destination port of each
packet to the protocol and port of each services that is defined. (See
Chapter 35 on page 561
This field displays when View is set to all sessions. Type the source IP
address whose sessions you want to view. You cannot include the source
port.
This field displays when View is set to all sessions. Type the
destination IP address whose sessions you want to view. You cannot
include the destination port.
This button displays when View is set to all sessions. Click this button
to update the information on the screen using the filter criteria in the
User, Service, Source Address, and Destination Address fields.
This is the total number of active sessions that matched the search
criteria.
Select the number of active sessions displayed on each page. You can
use the arrow keys on the right to change pages.
This field displays the user in each active session.
If you are looking at the sessions by users (or all sessions) report,
click + or - to display or hide details about a user's sessions.
This field displays the protocol used in each active session.
If you are looking at the sessions by services report, click + or - to
display or hide details about a protocol's sessions.
This field displays the source IP address and port in each active session.
If you are looking at the sessions by source IP report, click + or - to
display or hide details about a source IP address's sessions.
This field displays the destination IP address and port in each active
session.
If you are looking at the sessions by destination IP report, click + or
- to display or hide details about a destination IP address's sessions.
This field displays the amount of information received by the source in
the active session.
This field displays the amount of information transmitted by the source
in the active session.
This field displays the length of the active session in seconds.
for more information about services.)
ZyWALL USG 20/20W User's Guide