ZyXEL Communications ZYWALL USG 20 Manual page 761

Table 246 myZyXEL.com Logs (continued)
LOG MESSAGE
Build query message
failed.
Resolve server IP has
failed.
Connect to MyZyXEL.com
server has failed.
Build query message
has failed.
Verify server's
certificate has
failed.
Get server response
has failed.
Expiration daily-
check has failed:%s.
Do expiration daily-
check has failed.
Because of lack must
fields.
Server setting error.
Do expiration daily-
check has failed.
Do expiration daily-
check has succeeded.
Expiration daily-
check will trigger PPP
interface. Do self-
check.
System bootup. Do
expiration daily-
check.
After register. Do
expiration daily-
check immediately.
Time is up. Do
expiration daily-
check.
Read MyZyXEL.com
storage has failed.
Open /proc/MRD has
failed.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Some information was missing in the packets that the device
sent to the server.
The device could not resolve the myZyXEL.com server's FQDN
to an IP address through gethostbyname().
The device could not connect to the MyZyXEL.com server.
Some information was missing in the packets that the device
sent to the server.
The device could not process an HTTPS connection because it
could not verify the server's certificate.
The device sent packets to the server, but did not receive a
response. The root cause may be that the connection is
abnormal.
The daily check for service expiration failed, an error message
returned by the MyZyXEL.com server will be appended to this
log.
%s: error message returned by myZyXEL.com server
The device received an incomplete response to the daily
service expiration check and the packets caused a parsing
error for the device.
The device could not retrieve the server's IP address or FQDN
from local.
The daily check for service expiration failed.
The daily check for service expiration was successful.
Before the device sends an expiration day check packet, it
needs to check whether or not it will trigger a PPP connection.
The device processes a service expiration day check
immediately after it starts up.
The device processes a service expiration day check
immediately after device registration.
The processes a service expiration day check every 24 hrs.
Read data from EEPROM has failed.
This error message is shown when getting MAC address.
Appendix A Log Descriptions
761