ZyXEL Communications ZYWALL USG 20 Manual page 339

Table 94 Configuration > Network > NAT (continued)
LABEL
Remove
Activate
Inactivate
#
Status
Name
Mapping Type
Interface
Original IP
Mapped IP
Protocol
Original Port
Mapped Port
Apply
Reset
ZyWALL USG 20/20W User's Guide
DESCRIPTION
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific
entry.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the name of the entry.
This field displays what kind of NAT this entry performs: Virtual Server,
1:1 NAT, or Many 1:1 NAT.
This field displays the interface on which packets for the NAT entry are
received.
This field displays the original destination IP address (or address object)
of traffic that matches this NAT entry. It displays any if there is no
restriction on the original destination IP address.
This field displays the new destination IP address for the packet.
This field displays the service used by the packets for this NAT entry. It
displays any if there is no restriction on the services.
This field displays the original destination port(s) of packets for the NAT
entry. This field is blank if there is no restriction on the original
destination port.
This field displays the new destination port(s) for the pack et. This field is
blank if there is no restriction on the original destination port.
Click this button to save your changes to the ZyWALL.
Click this button to return the screen to its last-saved settings.
Chapter 17 NAT
339