ZyXEL Communications ZYWALL USG 20 Manual page 771

Table 252 Built-in Services Logs (continued)
LOG MESSAGE
SNMP port has been
changed to port %s.
SNMP port has been
changed to default
port.
Console baud has been
changed to %s.
Console baud has been
reset to %d.
DHCP's DNS option:%s
has changed.
Set timezone to %s.
Set timezone to
default.
Enable daylight
saving.
Disable daylight
saving.
DNS access control
rules have been
reached the maximum
number.
DNS access control
rule %u of DNS has
been appended.
DNS access control
rule %u has been
inserted.
DNS access control
rule %u has been
appended
DNS access control
rule %u has been
modified
DNS access control
rule %u has been
deleted.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
An administrator changed the port number for SNMP.
%s is port number assigned by user
An administrator changed the port number for SNMP back to
the default (161).
An administrator changed the console port baud rate.
%s is baud rate assigned by user
An administrator changed the console port baud rate back to
the default (115200).
%d is default baud rate
DHCP pool's DNS option support from WAN interface. If this
interface is unlink/disconnect or link/connect, this log will be
shown.
%s is interface name. The DNS option of DHCP pool has
retrieved from it
An administrator changed the time zone.
%s is time zone value
An administrator changed the time zone back to the default
(0).
An administrator turned on daylight saving.
An administrator turned off daylight saving.
An administrator tried to add more than the maximum
number of DNS access control rules (64).
An administrator added a new rule.
%u is rule number
An administrator inserted a new rule.
%u is rule number
An administrator appended a new rule.
%u is rule number
An administrator modified the rule %u.
%u is rule number
An administrator removed the rule %u.
%u is rule number
Appendix A Log Descriptions
771