Introducing Idp Profiles; Base Profiles - ZyXEL Communications ZYWALL USG 2000 Manual

Chapter 30 IDP
Table 144 Anti-X > IDP > General > Add (continued)
LABEL
To
Profile Selection
IDP Profile
OK
Cancel

30.3 Introducing IDP Profiles

An IDP profile is a set of packet inspection signatures.
Packet inspection signatures examine packet content for malicious data. Packet
inspection applies to OSI (Open System Interconnection) layer-4 to layer-7
contents. You need to subscribe for IDP service in order to be able to download
new signatures.
In general, packet inspection signatures are created for known attacks while
anomaly detection looks for abnormal behavior (see
information on anomaly detection).

30.3.1 Base Profiles

The ZyWALL comes with several base profiles. You use base profiles to create new
profiles. In the Anti-X > IDP > Profile screen, click the Add icon to display the
following screen.
Figure 346 Base Profiles
494
DESCRIPTION
Use the To field to specify the zone to which the traffic is going.
Select an IDP profile to apply to the entry's traffic direction.
Configure the IDP profiles in the IDP profile screens.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 31 on page 523
ZyWALL USG 2000 User's Guide
for