The Ssl Access Privilege Screen - ZyXEL Communications ZYWALL USG 20 Manual

24.2 The SSL Access Privilege Screen

Click VPN > SSL VPN to open the Access Privilege screen. This screen lists the
configured SSL access policies.
Figure 252 VPN > SSL VPN > Access Privilege
The following table describes the labels in this screen.
Table 122 VPN > SSL VPN > Access Privilege
LABEL
Add
Edit
Remove
Activate
Inactivate
Move
Object
References
#
Status
Name
User/Group
Access Policy
Summary
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to create
a new entry after the selected entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon.
In the field that appears, specify the number to which you want to move
the interface.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field displays the index number of the entry.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the descriptive name of the SSL access policy for
identification purposes.
This field displays the user account or user group name(s) associated to
an SSL access policy.
This field displays up to three names.
This field displays details about the SSL application object this policy
uses including its name, type, and address.
Chapter 24 SSL VPN
Section 11.3.2 on page 232 for
429