The Firewall Add/Edit Screen - ZyXEL Communications ZYWALL USG 20 Manual

Table 109 Configuration > Firewall (continued)
LABEL
Service
Access
Log
Apply
Reset

22.2.2 The Firewall Add/Edit Screen

In the Firewall screen, click the Edit or Add icon to display the Firewall Rule
Edit screen.
Figure 235 Configuration > Firewall > Add
The following table describes the labels in this screen.
Table 110 Configuration > Firewall > Add
LABEL
Create new
Object
Enable
From
To
ZyWALL USG 20/20W User's Guide
DESCRIPTION
This displays the service object to which this firewall rule applies.
This field displays whether the firewall silently discards packets (deny),
discards packets and sends a TCP reset packet to the sender (reject) or
permits the passage of packets (allow).
This field shows you whether a log (and alert) is created when packets
match this rule or not.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this
screen.
Select this check box to activate the firewall rule.
For through-ZyWALL rules, select the direction of travel of packets to
which the rule applies.
any means all interfaces or VPN tunnels.
ZyWALL means packets destined for the ZyWALL itself.
Chapter 22 Firewall
385