System; Dns, Www, Ssh, Telnet, Ftp, Snmp, Vantage Cnm; Logs And Reports - ZyXEL Communications ZYWALL USG 20 Manual

WHERE USED

6.7 System

This section introduces some of the management features in the ZyWALL. Use
Host Name to configure the system and domain name for the ZyWALL. Use
Date/Time to configure the current date, time, and time zone in the ZyWALL.
Use Console Speed to set the console speed. Use Language to select a language
for the Web Configurator screens.

6.7.1 DNS, WWW, SSH, TELNET, FTP, SNMP, Vantage CNM

Use these screens to set which services or protocols can be used to access the
ZyWALL through which zone and from which addresses (address objects) the
access can come.
MENU ITEM(S)
PREREQUISITES
Example: Suppose you want to allow an administrator to use HTTPS to manage
the ZyWALL from the WAN.
Create an administrator account (Configuration > Object > User/Group).
1
Create an address object for the administrator's computer (Configuration >
2
Object > Address).
Click Configuration > System > WWW to configure the HTTP management
3
access. Enable HTTPS and add an administrator service control entry.
• Select the address object for the administrator's computer.
• Select the WAN zone.
• Set the action to Accept.

6.7.2 Logs and Reports

The ZyWALL provides a system log, offers two e-mail profiles to which to send log
messages, and sends information to four syslog servers. It can also e-mail you
statistical reports on a daily basis.
MENU ITEM(S)
ZyWALL USG 20/20W User's Guide
Policy routes, firewall, content filter, user groups, VPN
Configuration > System > DNS, WWW, SSH, TELNET, FTP,
SNMP, Vantage CNM, Language
To-ZyWALL firewall, zones, addresses, address groups, certificates
(WWW, SSH, FTP, Vantage CNM), authentication methods (WWW)
Configuration > Log & Report
Chapter 6 Configuration Basics
105