Creating Function Block; Data Configuration - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Creating Function Block

3-1

Creating Function Block

3-1-1 Data Configuration

Select Insert/
Insert Node from
the Settings Menu.
(Creates a new
function block file.)
Select New from
File Menu
(Creates a new
project folder and
Project
Workspace.)
This section describes the function block data created using the CX-Process
Tool.
Personal computer memory
Project Workspace
Function block file
Select Open from the File
Menu (Specifies the
multi-node file and open all
relevant files.)
CS-Process\data\
Project
folder
Multi-node file Function block files
(.mul)
When creating a new Project Workspace, specify the folder (project folder)
where the Project Workspace will be saved. (Select New from the File Menu.)
Save all the Project Workspace data in the project folder in the memory of the
personal computer. (Select Save from the File Menu.)
To prepare a function block file (.ist) in the Project Workspace, insert a node.
(Select Insert – Insert Node from the Settings Menu.)
To open all the existing data in Project Workspace, specify only the multi-node
file (.mul) in the project folder. All relative files will be read. (Select Open from
File Menu.)
To save all the data in Project Workspace in a different project folder, select Save
As from the File Menu.
To import a function block file (.ist) into the Project Workspace, add a function
block file. (Select Add IST File from File Menu.)
Function block file
Select Save from File
Menu. (Saves the
present Project
Workspace.)
Hard disk
Others
Section
Select Add IST File from the
File Menu.
Function block file (.ist)
Select Save As from File
Menu.
(Saves the present Project
Workspace to a different
folder.)
Project folder
3-1
99