Creating A Page; Amending A Page - Omron CX-Supervisor User Manual

Creating a Page

2-1 Creating a Page
Note:
2-2

Amending a Page

1, 2, 3...
Note:
This chapter explains the concept of pages. The chapter covers creating,
amending, printing and saving pages.
A project must consist of at least one page.
To create a new page, CX-Supervisor must currently have a project open. If no
project is currently open, either click the Open button to open a previously
saved project, or select New from the Project menu to create a new project.
When you first create a project, CX-Supervisor creates a new page for you
automatically. For more details concerning projects, refer to chapter 6,
Projects.
With a project open, click the
example of a new blank page is shown as follows:
To amend a page, it must first be open. If no pages are open click the
button. A standard File Open dialog box with the caption Open Page opens.
The layout and usage depends on your operating system so see your
Microsoft documentation for details.
To amend a page:
1. Locate the drive and directory where the desired page is stored.
2. Select the desired page from the list presented.
3. Click the Open button to load the page.
Loading a page does not automatically make it part of a project. It is therefore
perfectly feasible to load and edit pages from other projects. Use the Project
Editor to attach a page to a project. For more details concerning projects, refer
to chapter 6, Projects.
The loaded page may now be edited as required using the CX-Supervisor
editing tools.
SECTION 2 Pages
button to create a new blank page. An
SECTION 2
Pages
27