Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 174

Using SCADA Software
1. To register a function block, select the
CSV Tag Auto Register option.
2. When the node function block is saved
(File/Save), the CSV tag setting file (.csv)
is automatically compiled.
3. Using a program such as Excel, edit the tag
names, scaling, and other data in the CSV
tag setting file (.csv) in the projects folder.
4. Open the projects folder (File/Open).
5. Compile the tag setting file for SCADA soft-
ware (Execute/Create Tag File/CSV Tag).
1, 2, 3...
Editing with Excel after Automatic Registration
Use the procedure shown in the following flow diagram.
Use the following methods.
1. When registering function blocks, such as Control Blocks or Operation
Blocks, for which CSV tags can be set, select the CSV Tag Auto Register
option as shown in the following illustration. (Clear the option if the function
block is not to be registered.)
Note The above automatic registration of CSV tag settings is executed at the following
times: Function block insertion, function block pasting (small item pasting when
middle block is selected), or block diagram pasting.
Automatic compiling of CSV tag setting file.
Editing CSV tag setting file.
Reading CSV tag setting file.
Only when already edited.
Set CSV tags.
Select the control block or operation block,
and then Settings/CSV Tags.
Creating tag file (.csv) for SCADA software.
Section 3-4
147