Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 198

User Link Tables
Pop-up menu
Add
Block Set
Move
Arrange Number
(See note 1.)
Edit (See (
Selected
note 2.) 2 )
Extension
Delete
Selected
Entries
No
Connection
Delete
Registered
Entry
Update
Selected
Refresh e es
Entries
C Cycle
All Entries
Find
Download Selected
(See note (See o e Entries
3.) )
All Entries
Filter
Connection Map
Print
Cut
Copy
Paste
Note 1. When using LCB projects with unit Ver. 1.5 or earlier, entry numbers cannot
be downloaded in a batch if the entry numbers are not arranged beforehand.
Always arrange the entries before downloading
Functions
Registers an entry for a single link (tag) in the User Link
Table.
Registers multiple links (tags) with the same attributes
in the User link Table at the same time with tag name to
which serial numbers are attached.
Increases the entry numbers for the specified entry and
all entries lower than it by an increment of 1.
Reassigns all entry numbers in ascending order. (This
is not a reordering function.) The reference for the
related function blocks is also automatically changed by
this operation.
Edits the selected entry.
Makes the extension settings for a selected entry (see
note 2).
Deletes selected entries.
After deletion, the corresponding entry numbers are
available.
Deletes all the entries for zero links at the same time.
After deletion, the corresponding entry numbers are
available.
Deletes the CX-Process Tool entry and the entry stored
in the LCB at the same time.
Sets the refresh cycle for the selected entries to match
the operation cycle of the destination function block.
Sets the refresh cycle for all entries to match the
operation cycle of the destination function block.
Finds entries by tag name.
Downloads the selected entries only.
Downloads all entries.
Entries are displayed according to the following filter
settings.
S Analog Contact: Displays the analog signal data or
contact signal data.
S Read/Write: Displays entries that read from or write to
the CPU Unit memory.
S Memory Area: Filters according to memory area
(CIO,W,H,DM,EM)
S Field Terminal: Displays the entries with field terminal
attributes.
S Specified as Field Terminal: Selected when a user
link table is displayed for which extension settings
have been made.
S No Connection: Displays entries with zero links.
Displays the connection map for the selected entry.
Prints the user link table.
Cuts an entry and places it in the special copy buffer for
the CX-Process Tool (i.e., not on the clipboard).
Copies an entry and places it in the special copy buffer
for the CX-Process Tool (i.e., not on the clipboard).
Pastes the entry from the special copy buffer for the
CX-Process Tool (i.e., not from the clipboard).
Section 3-5
171