Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 15

About this Manual:
This manual describes the installation and operation of the WS02-LCTC1-EV5 CX-Process Tool software
package and includes the sections described below. The CX-Process Tool is used to create and test func-
tion blocks for the CS1W-LC001 Loop Control Unit, the CS1W-LCB01, CS1W-LCB05, and
CS1W-LCB05-GTC Loop Control Boards, the CS1D-CPUjjP Process-control CPU Units, and the
CJ1G-CPUjjP and CJ1G-CPUjjP-GTC Loop-control CPU Units.
In this manual, the WS02-LCTC1-EV5 CX-Process Tool software package is generally referred to as sim-
ply the "CX-Process Tool."
Please read this manual carefully and be sure you understand the information provided before attempting
to install and operate the CX-Process Tool. Please read the following manuals carefully and be sure you
understand the information provided before setting up or using an application for a Loop Control Unit/
Board.
xv