Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 246

Printing
Printing for an LCU/LCB Element
1, 2, 3...
Printing for a Node (Maximum 3 LCU Elements and 1 LCBjj Element)
1, 2, 3...
Printing Example
1. Select the LCU/LCB element in the Project Workspace, and then Select
Print and Block Diagram from the File Menu. The following dialog box will
be displayed.
2. To print all the block diagrams within the LCU/LCB element, select the All
check box. To select specific block diagrams for printing, select the Select
Area check box, and specify the start block diagram and the end block dia-
gram. (Start/End correspond to the start and end block diagram numbers
registered in ascending order.) One block diagram will be printed per page.
You can also specify the start page. Select the Show and Hide Buttons on
each page to show and hide specific pages.
3. Click the OK Button. The block diagrams in active function block files will
start printing.
1. Select the active function block file in the Project Workspace, and then se-
lect Print and Block Diagram in the File Menu.
2. One block diagram will be printed per page. You can also specify the start
page. Select the Show and Hide Buttons on each page to show and hide
specific pages.
3. Click the OK Button. The block diagrams in active function block files will
start printing.
Section 3-11
219