Printing Block Diagrams - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Printing

3-11-3 Printing Block Diagrams

Printing an Active (i.e., Currently Open) Block Diagram
1, 2, 3...
218
Printing Example
1. Select the block diagram folder and select Edit/Block Diagram from the
Settings Menu to set the Edit Block Diagram Mode.
2. Right-click the block diagram window, and select Print Block Diagram from
the pop-menu. The following Print Dialog Box will be displayed.
3. Set the number of copies to be printed, and then click the OK Button to start
printing.
Section 3-11