Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 101

Overview of User Interface
Menu Submenu/
Command
File, Show
co continued ed Driver e
Select S
Dialog
Exit
View
Toolbar
Project Workspace
Output Window
Engineer-
ing Unit g U
Mode
Settings Activate Function
Block File
Network Settings
Change PLC
Tag
Setting
74
Show The Communications Driver Dialog Box will be displayed
when the CX-Process Tool starts.
Hide The Communications Driver Dialog Box will not be
displayed when the CX-Process Tool starts.
Exits the CX-Process Tool.
Displays or hides the toolbar.
Displays or hides the Project Workspace area.
Displays or hides the Output Window.
View Toggles between Engineering Unit mode and Percentage
Mode.
Assert Toggles between displaying and hiding the Engineering
Rounding Unit Assert Rounding Errors Dialog Box.
Errors
Activates the selected function block file so that the file
can be edited or operated online. When the file is
activated, the function block file on the tree will turn red.
Note If the current function block file has been changed, it
must be saved before executing this command.
Sets the network address, node address, and unit
address.
Makes initial settings for online connections such as the
PLC model and network type settings when connecting
online with CX-Server.
Monitor Sets tags for CX-Process Monitor (with the tag names, tag
Tag (Loop comments, scaling, and units).
Control
Unit only)
CSV Tag Sets CSV tags for each function block for output to
SCADA software. Tags include the tag name, tag
comment, scaling, unit, etc.
Note The tag names are representative tags. The ITEM
tags under the tags are predetermined and fixed for
each function block. These can be saved in CSV for-
mat as CSV tag files.
Monitor Sets tags for CX-Process Monitor Plus (with the tag
Plus Tag names, tag comments, scaling, and unit).
Description
Section 2-2
Conditions for
selection
When an LCU or
LCB element is C e e e s
selected
---
When a function
block file is selected
When a function
block file or
LCU/LCB element is
selected
When a function
block file is selected
When a Block Send
Terminal to
Computer or Area to
Send to All Nodes
Function Block is
selected
When a function
block file is selected
When a Send All
Blocks, Receive All
Blocks, Contact
Distributor, Internal
Switch, Input
Selector, or
Constant Generator
block is selected