Version 4.0 - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Version Improvements
Item
Monitor software

1-4-8 Version 4.0

Ver. 3.1
CX-Process Monitor
(CX-Process Monitor
Plus cannot be used.)
The improvements made from version 3.2 to version 4.0 of the CX-Process Tool
are listed in the following table.
Item
Support for CJ1G-CPUjjP
Loop-control CPU Units and LCB01/05
version 2.0
Displaying Loop Controller memory
map
Backing up to and recovering from
Memory Card project comments,
annotations, tags, and connection data
Support for SYSMAC OPC Server
version 2.6 scaling functions
Starting the NS Faceplate Auto Builder The Faceplate Auto-Builder for NS can be
Ver. 3.2
CX-Process Monitor or
CX-Process Monitor Plus
Details
The following new functions are supported:
Simple backup of the Loop Controller's
function block data to the Memory Card
Selecting the step to restart Segment
Program 2 (Block Model 157) to match the
first or second reference input
Synchronization of Segment Program 2
(Block Model 157)
Setting hot start time
Reset wind up protection of secondary
loop of cascade control
Setting range 0.00% to 100.00% for input
signals in Split Converter (Block Model
169)
Addition of Field Terminal Blocks (Ai4
terminal (PTS51/52), Ai8 terminal
(PTS55/56), Ao2 terminal (DA021), and
Ai4/Ao2 terminal (MAD42)
The status showing how the Loop
Controller is using CPU Unit memory can
be displayed as a list.
Comments, annotations, tags, and
connection data, which previously could
not be saved in the Loop Controller, can
now be saved in the Memory Card
installed in the CPU Unit. This enables
comments, annotations, tags, and
connection data included in function block
data to be uploaded from the Loop
Controller.
The scaling functions from SYSMAC OPC
Server version 2.6 have been expanded.
The expanded scaling information for CSV
tags can be exported to the SYSMAC
OPC Server version 2.6.
executed in the sequence of operations
when compiling CSV tags from the
CX-Process Tool. Using this method, the
folder for the created CSV tag file will be
automatically specified in the parameter
setting screen that is displayed when the
Faceplate Auto-Builder for NS starts.
Section 1-4
21