Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 256

Setting Options Section 3-12
Data for SYSMAC OPC Server Version 2.6 (CX-Process Tool Version 4.0 or
Higher Only) on page 142.
Show extended property
Select this option to output OPC engineering tags. This function enables scaling
to be performed using the OPC Server.
Always enable OPC Server scaling tag option
Select this option to make outputting OPC engineering tags the default setting.
Treat User Link Table as OPC Server scaling tag
Select this option to output engineering tags for the CSV tags in the user link
table. When this option is selected, OPC server engineering tags can also be
output to CSV tag entries in the user link table.
Assume Data Range of ITEM Related to MV to Be 0-100%
Select this option to set the data range's lower limit to 0.00% and upper limit to
100.00% for the three items MV (MV output value or manual MV during MAN
mode), MH_LMT (high MV limit), ML_LMT (low MV limit) in the OPC Server.
Replace the first character of tag name with "_"
Select this option to replace the hash symbol (#) at the beginning of tag names in
the CSV tag file with an underscore (_). Tags cannot be imported to some SCA-
DA software if a hash symbol is used as the first character of the tag names. The
hash symbol can be changed to an underscore to enable importing.
229