User Link Tab Page - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Setting Options

3-12-8 User Link Tab Page

232
Scale
This option sets the zoom factor for sequence tables. (This option performs the
same function as the Scale Menu in Sequence Table Mode.)
100 (default): The normal display size
50: Half of the default size
200: Twice the default size
Edit Mode enabled when window is opened.
When this option is selected (the default), edit mode is automatically entered
when a sequence table is displayed.
When this option is not selected, edit mode is not entered when a sequence
table is displayed. (To enter edit mode, Edit Mode – Enable must be selected
from the pop-up menu that appears after right-clicking on the sequence table.)
Show Point Navigation
When this option is selected, intersection points are displayed. This option is se-
lected by default. (This option performs the same function as Point Navigation
– Enable on the Operation Menu.)
Show Vertical Line
When this option is selected, vertical lines are displayed. This option is not se-
lected by default. (This option performs the same function as Vertical Line –
Show on the Operation Menu.)
Register Tag Name automatically when connected to Field Terminal.
When this option is selected, tags are automatically registered in the user link
table (with automatic tag naming) when software connections are made for field
terminals. This option is selected by default.
Set default to update refresh cycle of User Link Table automatically.
When this option is selected (the default), the refresh period for tags in user link
tables is set to the same value as the processing period for the function block to
which a software connection is made.
When this option is not selected, the refresh period specified for tags in user link
tables is used.
(This option performs the same function as the Update user link table refresh
cycle option in the LCB Download Dialog Box display when downloading Loop
Controllers.)
Section 3-12