Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 169

Using SCADA Software
Tag Files for RS View 32
NS Face Plate
Auto Builder
NS project
file (.ipp,
binary)
NS-series PT
Expanded Scaling Data for SYSMAC OPC Server Version 2.6 (CX-Process Tool
Version 4.0 or Higher Only)
142
Create the tag file for RS View 32 (using Execute – Create Tag File – RS View
Tag). Import the tag file directly into RS View 32 using its import utility.
Outputs CSV tag file.
Execute – Create Tag File – CSV Tag or
Execute – Create Tag File – Start NSFP.
CSV tag file
for SCADA
software
(Taglist.csv)
Imported
Imported
SYSMAC OPC
Server
Manually
exported.
RS View
tag file
(***.csv)
Imported using
import utility.
Note The CSV settings file (project_name.csv) is a data file automatically generated
by the system to create a SCADA software or RS View tag file. In comparison,
the SCADA tag file or RS View tag file is output based on the CSV settings file
and contains the CPU Unit I/O memory allocations for each tag ITEM.
Scaling functions have been expanded in SYSTEM OPC Server Version 2.6 and
higher. The expanded scaling data enables scaling in engineering units using an
OPC Server. Therefore, scaling settings in the SCADA software are not re-
quired. CX-Process Tool version 4.0 or higher is required to export CSV tags
with expanded scaling data from the CX-Process Tool to SYSMAC OPC Server
version 2.6. Expanded scaling data cannot be exported if lower versions of the
CX-Process Tool are used.
CX-Process Tool
CSV tag file
for SCADA
software
(Taglist.csv)
Automatically
generated.
OPC tag
settings
file (.sdb,
binary)
RS View
Section
Outputs RS View tag file.
Execute/Create Tag File/RS
View Tag
(CX-Process
Tool version
3.2 or higher)
Automatically
generated.
SYSMAC
OPC Server
version 2.4 or
higher
Automatically
generated.
RS View
tag file
(***.csv)
Imported using
import utility.
3-4