Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 358

Setting Segment Programs
Area type: CIO, W, H, DM, or E0 to E12 (EC) can be selected.
Beginning address: Used to set the beginning address for allocating program pattern data.
PLC memory allocation images:
Left column: Indicates the beginning and end of the addresses allocated for program pattern data.
Center and right columns: Descriptions of the parameters stored in each address are displayed.
Check Memory Area Button: Used to display Loop Controller memory maps. When program pattern data is allo-
cated, memory can be checked to ensure that no addresses are duplicated. For details, refer to 3-10 Displaying
Loop Controller Memory Maps.
Executing Auto-tuning in a Tuning Window
Use the following procedure to specify a PID bank and execute the Auto-tuning (AT) command.
1. With the Segment Program 3 Tuning Window displayed, click the AT Button.
Execute AT Button
AT Button: The button for executing AT
Destination bank No.: The bank number where the AT execution results are to be stored
Selected bank number: The bank number specified in the step being executed
2. The Execute AT Dialog Box will be displayed.
3. In the Target Bank No. field, input the bank number where the AT execution results are to be stored. If 0 is input,
the AT execution results will be stored at the current bank (i.e., the bank number specified in the step currently
being executed).
4. Click the AT Start Button. The AT Start Button will be changed into the Stop AT Button. To cancel the auto-tun-
ing in progress, click the Stop AT Button.
334
Appendix C
Bank No. [Destination bank number]
(= the selected bank number)