Clear All - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Table of Contents

Clear All

This section provides information on how to clear all the function block data and

error log data from the Loop Controller. Take the following steps to clear all the

1. Select Operation and Clear All from the Execution Menu. The following

dialog box will appear.

2. Click the OK Button. A confirmation dialog box will appear.

3. Click the OK Button.

Note When CX-Server is being used and a communications timeout error occurs dur-

ing the Clear All operation, select Change PLC from the Settings menu, click the

Network tab, and set the response timeout time to 10 s or longer.

Table of Contents