Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 211

Creating Step Ladder Program Instructions
Inserting Comments
(Annotations)
1, 2, 3...
184
c) Select the upper left corner of the area where the data is to be pasted. A
black frame will be displayed.
d) Click the right mouse button and select Paste from the pop-up menu.
With Loop Control Unit versions 2.50 or later and LCBjjs, it is possible to in-
sert annotations (user-defined text) into ladder diagrams in Edit Step Ladder
Program Mode. The annotations are a kind of symbol.
Up to 16 annotations can be inserted in one ladder diagram and up to 3,000 an-
notations can be inserted in one function block file. Each annotation can be up to
200 characters long.
This function allows user-set labels (such as "A/M Switch" or "RSP/LSP Switch")
to be inserted and displayed next to symbols such as LD or OUT. The diagrams
with annotations can also be printed out to create complete sche-
Loop Controller
matics showing the program sequence. (For details on downloading annotation
data, refer to 4-9 Transferring Tag and Comment Data on page 309.)
Use the following procedure to insert annotations.
1. Click the Annotation icon and move to the location where the annotation will
be inserted. As symbols, annotations can be inserted at symbol positions.
The new annotation will contain the default text "Comment Data" as shown
in the following diagram.
2. Click the Annotation icon.
Note If this icon is not clicked, a new annotation will be inserted each time
that the mouse is clicked in the ladder diagram.
Click the upper left corner of the
area into which to paste the data.
Section 3-7