Omron CP - PROGRAMMING MANUAL 05-2007 Programming Manual page 417

Symbol Math Instructions
3-10-26 DOUBLE UNSIGNED BINARY DIVIDE: /UL(433)
Purpose
Ladder Symbol
Variations
Applicable Program Areas
Operand Specifications
384
Divides 8-digit (double-word) unsigned hexadecimal data and/or constants.
/UL(433)
Dd: 1st dividend word
Dd
Dr: 1st divisor word
Dr
R: 1st result word
R
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported.
Immediate Refreshing Specification
Block program areas Step program areas
OK OK
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
DM Area
Indirect DM addresses
in binary
Indirect DM addresses
in BCD
Constants
Data Registers
Index Registers
Indirect addressing
using Index Registers
Subroutines
OK
Dd
CIO 0 to CIO 6142
W0 to W510
H0 to H510
A0 to A958
T0000 to T4094
C0000 to C4094
D0 to D32766
@ D0 to @ D32767
*D0 to *D32767
#00000000 to #00000001 to
#FFFFFFFF #FFFFFFFF
(binary) (binary)
&0 to &1 to
&4294967295 &4294967295
(unsigned deci- (unsigned deci-
mal) mal)
---
---
,IR0 to ,IR15
–2048 to +2047 ,IR0 to –2048 to +2047 ,IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
Section 3-10
/UL(433)
@/UL(433)
Not supported.
Interrupt tasks
OK
Dr R
CIO 0 to
CIO 6140
W0 to W508
H0 to H508
A448 to A956
T0000 to T4092
C0000 to C4092
D0 to D32764
---