Omron CP - PROGRAMMING MANUAL 05-2007 Programming Manual page 759

High-speed Counter/Pulse Output Instructions
Operation Purpose Application
Stopping Stop Immediate
pulse out- pulse stop
put output
Stop Immediate
pulse stop
output
Note
726
Frequency changes
Pulse frequency
Present frequency
Execution of INI(880)
Pulse frequency
Present frequency
Execution of SPED(885)
■
Independent Mode Positioning
When independent mode operation is started, pulse output will be continued
until the specified number of pulses has been output.
(1) Pulse output will stop immediately if the CPU Unit is changed to PRO-
GRAM mode.
(2) The number of output pulses must be set each time output is restarted.
(3) The number of output pulses must be set in advance with PULS(881).
Pulses will not be output for SPED(885) if PULS(881) is not executed first.
Description
Stops the pulse
output immedi-
ately.
Time
Stops the pulse
output immedi-
ately.
Time
Section 3-20
Procedure/
instruction
SPED(885)
(Continuous)
INI(880)
SPED(885)
(Continuous)
SPED(885)
(Continuous, Tar-
get frequency of
0 Hz)