Omron CJ - 09-2009 Operation Manual page 341

PLC Setup
Data Shift Process Instructions
Programming
Console address
Word Bit(s)
+198 13 0: Not executed in
background.
1: Executed in back-
ground.
Default: 0
Communications Port Number for Background Execution
Programming
Console address
Word Bit(s)
+198 0 to 3 0 to 7: Communica-
tions ports 0 to 7
(internal logical
ports)
FB Communications Instruction Settings (Settings for OMRON FB Library)
Number of Resends
Programming
Console address
Word Bit(s)
+200 0 to 3 0 to F: 0 to 15
Default: 0
Response Timeout, Comms Instruction in FB
Programming
Console address
Word Bit(s)
+201 0 to 15 0001 to FFFF (Unit:
0.1 s, 0.1 to 6553.5)
0000: 2 s
DeviceNet Communications Instruction Response Monitoring Time
Programming
Console address
Word Bit(s)
+202 0 to 15 0001 to FFFF (Unit:
0.1 s, 0.1 to 6553.5)
0000: 2 s
Settings
This setting determines if Data Shift Instruc-
tions will be processed over multiple cycle
times (i.e., processed in the background).
Note This setting does not exists in CJ1@-CPU@@ CPU Units.
Settings
The communications port number (internal
logical port) that will be used for background
execution.
Note This setting does not exists in CJ1@-CPU@@ CPU Units.
The following PLC Setup settings are used only when using the OMRON FB
Library.
Settings
Set the number of retries for sending com-
mands when executing DeviceNet explicit
messages or FINS messages within func-
tion blocks.
Note This setting does not exists in CJ1@-CPU@@ CPU Units.
Settings
A response timeout occurs when no
response is returned within the time set
here for FINS commands executed within a
function block.
Note This setting does not exists in CJ1@-CPU@@ CPU Units.
Settings
A response timeout occurs when no
response is returned within the time set
here for explicit messages commands exe-
cuted within a function block.
Function
Function
Function
Function
Function
Section 7-1
Related When set-
flags and ting is read
words by CPU Unit
--- At start of
operation
Related When set-
flags and ting is read
words by CPU Unit
--- At start of
operation.
Related New set-
flags and ting's effec-
words tiveness
A58000 to Start of oper-
A58003 ation
Related New set-
flags and ting's effec-
words tiveness
A581 Start of oper-
ation
Related New set-
flags and ting's effec-
words tiveness
A582 Start of oper-
ation
293