Omron CJ - 09-2009 Operation Manual page 156

I/O Units
Mixed I/O Units
Name
24-V DC Sinking Fujitsu-compatible connector
Input/ Inputs: 24 V DC,16 inputs
Transis- Outputs: 12 to 24 V DC, 0.5 A, 16 outputs
tor Out- (See note 1.)
put Units
Fujitsu-compatible connector
Inputs: 24 V DC, 32 inputs
Outputs: 12 to 24 V DC, 0.3 A, 32 outputs
(See note 1.)
MIL connector
Inputs: 24 V DC,16 inputs
Outputs: 12 to 24 V DC, 0.5 A, 16 outputs
(See note 1.)
MIL connector
Inputs: 24 V DC, 32 inputs
Outputs: 12 to 24 V DC, 0.3 A, 32 outputs
(See note 1.)
Sourcing MIL connector
Inputs: 24 V DC, 16 inputs
Outputs: 24 V DC, 0.5 A, 16 outputs,
load-short circuit protection (See note 1.)
TTL I/O Units MIL connector
Inputs: TTL (5 V DC), 32 inputs
Outputs: TTL (5 V DC, 35 mA),
32 outputs
B7A Interface Units 32 inputs, 32 outputs
Note
108
Specifications
1. The cable-side connector is not provided with Units equipped with cables.
Purchase the cable separately (page 264), or use an OMRON Connector-
Terminal Block Conversion Unit or I/O Terminal (page 267).
2. Although 16 I/O bits are allocated, only 8 of these can be used for external
I/O. This Unit is also treated as a 16-point I/O Unit in the I/O tables.
3. The Unit must be connected in one of the five positions (for CJ1-H CPU
Units) or three positions (for CJ1M CPU Units) next to the CPU Unit on the
CPU Rack. An I/O setting error will occur if the Unit is connected to other
positions on the CPU Rack or to any position on an Expansion Rack.
Model Number
of bits
allocated
CJ1W-MD231 32
(See note 1.)
CJ1W-MD261 64
(See note 1.)
CJ1W-MD233 32
(See note 1.)
CJ1W-MD263 64
(See note 1.)
CJ1W-MD232 32
(See note 1.)
CJ1W-MD563 64
(See note 1.)
CJ1W-B7A22 64
Section 2-4
Mountable Racks
CJ-series CJ-series
CPU Rack Expansion
Racks
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes