Omron CJ - 09-2009 Operation Manual page 120

CJ1M Functions Arranged by Purpose
Item
Decelerate to a stop during
speed control.
External Origin Input Sig-
I/O nal
Origin Proximity
Input Signal
Positioning Com-
pleted Signal
Error Counter
Reset Output
CW/CCW Limit
Input
72
CJ1M
Execute an ACC(888) (continuous) instruc-
tion during a speed control operation
started with SPED(885) (continuous) or
ACC(888) (continuous).
A built-in input is used.
A built-in input is used.
A built-in input is used.
A built-in output is used.
A separate Input Unit is used and an Auxil-
iary Area bit is controlled from the program.
CJ1W-NC Position Control Unit
Performed with the Decelerate to Stop Bit.
Input through the Position Control Unit's
input terminal.
Input through the Position Control Unit's
input terminal.
Input through the Position Control Unit's
input terminal.
Output through the Position Control Unit's
output terminal.
Input through the Position Control Unit's
input terminal.
Section 1-9