Adding A Windows Nt 3.X Driver - Tektronix Phaser 740 Setup Manual

7
Windows NT

Adding a Windows NT 3.x driver

48
PhaserShare Networking
Windows NT creates the printer
1.
If you want Windows NT to print a test page after installing the printer
driver, click Yes (recommended). If you do not want the Windows NT
test page, click No. When finished, click Finish.
2.
When prompted for the Windows NT 3.51 CD-ROM, insert it into your
computer's CD-ROM drive and click OK.
3.
Type the path name to the driver.
N
O T E
For proper installation, you must use the latest Windows NT 3.51 drivers and
Windows NT 4.0 drivers are available from the Tektronix web site:
www.tek.com/Color_Printers/support/software.html
The printer should now exist on the Windows NT 3.51 server and have
Windows NT 4.0 drivers available. Now any Windows 4.0 client can use that
shared printer, and the driver is installed automatically.
This update procedure provides printer page size information for Windows NT
applications. However, TekColor color corrections and other PostScript Level 2
features are not supported by the Windows NT driver. Refer to your printer's
user documentation for instructions on other ways of selecting color corrections.
Refer to your Microsoft Windows NT documentation for details on features in
the Windows NT driver.
These instructions assume a basic familiarity with Windows NT operation and
terminology. For additional information about Windows NT, refer to your
Microsoft Windows NT documentation.
1.
Start your system with Windows NT.
2.
From the Main window, double-click the Print Manager icon.
3.
Install the Tektronix printer. From the Printer menu, select Create
Printer; the Create Printer dialog box appears.
4. Under Driver, scroll to the end of the list and select Other; the Install
Driver dialog box appears.