Tektronix Phaser 740 Setup Manual page 19

5.
Return the printer to normal operation:
a.
Press Exit until the front panel displays Network Settings.
b.
Press Exit again.
If you have changed any parameters that require a printer reset
to take effect, you will be prompted to reset the printer. If you
press Reset, the printer resets. If you press Resume, the front
panel displays Network Settings. Press Exit; the printer
returns to normal operation, but the changes you have made
will not take effect until the next time the printer is reset.
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays Ready.
Setting Frame Routing from the Phaser 780 front panel
When the Token Ring card is installed in the printer, you can set the Frame
Routing from the printer's front panel. The choices are Transparent (no source
routing) or Source Route (use source routing).
1.
While Ready is displayed, press Select; the Printer menu is
displayed:
Printer Menu
Help Pages
2.
Press or
Settings.
Printer Menu
Network Settings
3.
Press Menu to enter the Network Settings menu; the front panel
displays:
Network Settings
Token Ring
4. Press Menu again; the front panel displays the first of two Frame
Routing choices.
Connecting Your Printer to a Network
Menu
until the front panel displays Network
Menu
Menu
2
13
Setup Guide