Windows 95 And Windows 98: Phaserport Software; Tcp/Ip Configuration For The Pc - Tektronix Phaser 740 Setup Manual

Chapter
6
TCP/IP configuration for the PC
Windows 95 and
Windows 98:
PhaserPort Software
The Tektronix PhaserPort software is a port monitor that allows you to print
directly from Windows 95 and Windows 98 to a networked Tektronix printer via
TCP/IP. There is no need for third-party software or a third-party interface
attached to the parallel port. PhaserPort gives your printer increased
throughput without sacrificing connectivity.
If you don't already have a TCP/IP address configured for your PC, contact your
system administrator to ensure that the configuration is made according to your
company guidelines. If there is no TCP/IP network already in place, configure
your PC with a unique address such as 192.1.1.1.
To check the IP address for your PC, follow these steps:
1.
From the Start menu, click Run.
2.
Enter:
winipcfg
3.
Click OK.
4.
Choose your network adapter from the pulldown list.
5.
The IP address is listed in the IP Address field.
For more information on installing and configuring TCP/IP in Windows
environments, see your Microsoft Windows documentation.
37
Setup Guide