Introduction; Before You Begin Network Configuration; Printing A Configuration - Tektronix Phaser 740 Setup Manual

1

Introduction

Before you begin network configuration
Printing a Configuration Page
Printing a Configuration Page: Phaser 740 and 360 front panels
2
PhaserShare Networking
Set up your printer and connect it to the network. See your printer's user
documentation for information about setting up the printer. For
information about connecting the printer to the network, see Chapter 2 of
this manual, "Connecting Your Printer to a Network".
Install the Tektronix driver for your printer on every Macintosh and PC
that will send print jobs to the printer. For details on driver
installation, see your printer's user documentation.
For NetWare environments. To speed the setup process and avoid
conflicts, familiarize yourself with the components of your network.
You should know which version(s) of NetWare are installed, which
versions of client software are used, and the network topology (frame
types, routers, hubs, and cabling).
Your printer's Configuration Page supplies useful information for installing and
configuring the printer on a network.
1.
While the Ready message is displayed, press Menu . The printer
displays the first item in the menu:
Help Pages
<---- ---->
2.
Press Menu to access the Help Pages; the following message appears:
Menu Map
<---- ---->
3.
Press <---- or ----> until the following message appears:
Configuration Page
<---- ---->
4.
Press Print .
Menu
Print
Print