Tektronix Phaser 740 Setup Manual page 12

2
Connecting Your Printer to a Network
Ethernet connections and indicators
6
PhaserShare Networking
Built-in Ethernet connector
The printer's built-in Ethernet connector has the following connections and
indicators:
1.
LINK indicator (Phaser 360 printer only); on indicates a working
connection to a hub; off indicates no connection to a hub.
2. RCV indicator (green); blinks while the network interface is receiving.
3.
XMT indicator (yellow); blinks while the network interface is
transmitting.
4.
Twisted pair (10BaseT) connector.
2
RCV
1
LNK Ethernet
3
XMT
4
0180-01