Tektronix Phaser 740 Setup Manual page 53

Add the printer
1.
From a Windows NT 4.0 client, click the right-mouse button on
Network Neighborhood. Select Find Computer.
2.
Type the name of the Windows NT 3.51 server. Press Enter.
3.
Double-click the Windows NT 3.51 server icon.
4.
Double-click the Windows NT 3.51 server's Printers folder.
5.
In the Windows NT 3.51 server's Printers folder, double-click
Add Printer.
N
O T E
If you do not have an Add Printer icon, then you are not logged on with an
account that has Administrator access on the Windows NT 3.51 server.
The first Add Printer Wizard dialog box should say Remote print
server <3.51 server name>.
6.
Select the port where the printer is connected.
N
O T E
You cannot create a port on the Windows 3.51 server from the Windows 4.0
client; create the port on the Windows 3.51 server. After the port is created,
you can specify that port from the Windows 4.0 client.
Install the driver
1.
In the Add Printer Wizard dialog box, click Have Disk to add a new
Tektronix driver.
2.
Type the path name to the driver files. This can be A:\ if the files are
on a diskette. If these files were downloaded from an on-line service,
type the path name where they were saved. Click OK.
3.
Select the printer model and click Next.
Enter the printer's name and set up sharing
1.
Type the printer's name; this can be any name you want. Click Next.
2.
If this printer is to be shared on the network, click Shared and
highlight all applicable platforms that may be connecting to this
server (Windows NT 4.0 x86 should be one).
7
Windows NT
47
Setup Guide