Setting Ip Parameters: Phaser 780 Printer Front Panel - Tektronix Phaser 740 Setup Manual

Setting IP parameters: Phaser 780 printer front panel

8.
Return the printer to normal operation.
a.
Press until the front panel displays Network Settings.
b.
Press again.
If you have changed any parameters that require a printer reset
to take effect, you will be prompted to reset the printer. If you
press Reset, the printer resets. If you press Resume, the front
panel displays Network Settings. Press
returns to normal operation, but the changes you have made
will not take effect until the next time the printer is reset.
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays Ready.
N
O T E
When you set the IP addressing parameters from the front panel, the front
panel selections for DHCP/BOOTP and RARP are automatically set to
Disabled.
1.
While Ready is displayed, press Select; the Printer menu is
displayed:
Printer Menu
Help Pages
2.
Press or
Settings.
Printer Menu
Network Settings
3.
Press Menu to enter the Network Settings menu; Network
Settings appears on the top line of the display.
4.
If TCP/IP is not already displayed, press
displays TCP/IP.
5.
To set the IP address:
a.
Press Menu again; the front panel displays Interface.
b.
Press until the front panel displays IP Address.
Setting the Printer's IP Addressing Parameters
Menu
until the front panel displays Network
Menu
; the printer
until the front panel
Setup Guide
8
55