Setting Ipx Frame Types From The Front Panel - Tektronix Phaser 740 Setup Manual

4
Novell NetWare Configuration

Setting IPX frame types from the front panel

Setting IPX frame types: Phaser 740 and Phaser 360 front panels
28
PhaserShare Networking
1.
Enter the Network Settings menu:
a.
Press Menu; the front panel displays Help Pages.
b.
Press ----> or <---- until the front panel displays Network
Settings.
c.
Press Menu; the front panel displays TCP/IP.
2.
Access the menu of frame types:
a. Press ----> until the front panel displays NetWare.
b.
Press Menu; the front panel displays Enable Interface.
c.
Press ---->; the front panel displays IPX Frame Type.
d.
Press Menu; the front panel displays the first in a menu of frame types.
3.
Enable or disable the frame type:
a.
Press ----> until the frame type you want is displayed.
b.
Press Menu to display the current status of the frame type:
Enabled or Disabled.
c.
Press ----> until the frame type is either Enabled or Disabled,
as desired.
d. Press OK to enter your choice into the printer. The front panel
briefly displays Selected, then returns to the display of the frame
type name.
4.
You can set more than one frame type; to set other frame types, repeat
Step 3.