Setting Up The Printer On A Network (Windows Nt 4.0); To Add Or Update The Driver On A Windows Nt 4.0 Server Or Workstation - Tektronix Phaser 380 Service Manual

Setting up the printer on a network (Windows NT 4.0)

To add or update the driver on a Windows NT 4.0 Server or Workstation

Note
You must have the original Windows NT 4.0 diskettes (or CD-ROM)
to complete this procedure.
You will need the printer's IP address for this procedure; it may be
available on the printer's Configuration Page. If not, ask the network
administrator.
1.
Log-in as Administrator or a user with administrator access privileges.
2. Click on the Start button. Select Settings, then select Printer from the
submenu.
3. Double-click on the Add Printer icon In the Printers dialog box.
4.
Select one of these options, then click Next:
My Computer Locally installed and managed printer
Networked printer
Network
1. If this is a locally connected printer, click on the port that the printer is
connected to:
LPTx Parallel-printer connection
COM Serial-connected printer
Add Port Networked printer. For mixed environments, the
printer can also connect using EtherTalk.
Recommended: Connect via TCP/IP by double-clicking on the
LPR Port.
Note If the LPR port is not listed in this box, the Microsoft TCP/IP
Printing Services needs to be added to the NT machine. The original
Windows NT distribution diskettes are needed during installation.
Click Start, Settings, Control Panel, Network. Click on the
Services tab, then click Add. Select Microsoft TCP/IP Printing,
then click OK and install this service.
If Microsoft TCP/IP Printing Services is not listed in the options box,
install the TCP/IP protocol on the server. This is done from the
Control Panel/Network box. Click on the Protocols tab and click
Add. Select TCP/IP Protocol and click OK. To apply these
changes, restart the Windows NT 4.0 server.
Installing the Printer and Drivers
Service Manual
2
2-35