Using The Windows Nt Postscript Driver; Printing From Dos - Tektronix Phaser 300X User Manual

3
Printing

Using the Windows NT PostScript driver

If you are using Microsoft Windows NT, follow the instructions in the
Phaser 300X Drivers and Utilities Printing Reference to set up a Windows NT
PostScript driver with a Phaser 300X printer. You can select printer page
sizes in the driver for Windows NT applications, however, TekColor color
corrections and other PostScript Level 2 features are not supported by the
Windows NT driver. Refer to page 7-5 for instructions on selecting color
corrections from the printer's rear panel switches. Refer to your Microsoft
Windows NT documentation for details on features in the Windows NT
driver.

Printing from DOS

Refer to the Phaser 300X Drivers and Utilities Printing Reference for
information on printing from DOS.
3-10
Phaser 300X Color Printer