Pc: Updating The Driver Software For Windows Nt - Tektronix Phaser 340 User Manual

2
Getting Set Up
2-38
Phaser 340 Color Printer

PC: Updating the driver software for Windows NT

If you are using Microsoft Windows NT, follow these instructions to update
the printer driver that enables you to print to a Phaser 340. This update
procedure provides printer page size information for Windows NT
applications. However, TekColor color corrections and other PostScript
Level 2 features are not supported by the Windows NT driver. Refer to the
Phaser 340 Drivers and Utilities Printing Reference for instructions on other
ways of selecting color corrections. Refer to your Microsoft Windows NT
documentation for details on features in the Windows NT driver.
Note This procedure requires that a PostScript printer driver be
installed on your system. If it is not, you will need your original
Windows NT setup diskettes (or CD-ROM).
1. Start your system with Windows NT.
2.
If your computer has an Intel-compatible processor, such as the
Intel I386, go on to Step
If your computer is a MIPS or Alpha, you need to edit the
PRINTER.INF file on the Phaser 340 CD-ROM or Printer Software
for Windows diskette.
a. The Phaser 340 CD-ROM and Printer Software for Windows
diskette are read-only (write-protected). To edit the
PRINTER.INF file, copy the following files from the top level
of either CD-ROM or diskette to a new, formatted floppy
diskette.
Place all files at the top (root) level of the new diskette.
TEK1
PRINTER.INF
TK340172.PPD
TK340692.PPD
3
.
(for the standard configuration)
(for the printer's extended features option)