Tektronix Phaser 740 Setup Manual page 35

Setting IPX frame types: Phaser 780 printer
5.
Return the printer to normal operation:
a.
Press (Exit) until the front panel displays Network Settings.
b.
Press (Exit) again.
If you have changed any parameters that require a printer reset
to take effect, you are prompted to reset the printer. If you press
Reset, the printer resets. If you press Resume, the front panel
displays Network Settings. Press
returns to normal operation, but the changes you have made do
take effect until the next time the printer is reset.
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays Ready.
1.
Enter the Network Settings menu:
a.
While Ready is displayed, press Select; the Printer menu is
displayed:
Printer Menu
Help Pages
b.
Press or
Settings.
Printer Menu
Network Settings
c. Press Menu to enter the Network Settings menu; Network
Settings appears on the top line of the display.
2.
Access the menu of frame types:
a.
Press until the front panel displays NetWare.
b.
Press Menu; the front panel displays Interface.
c.
Press until the front panel displays IPX Frame Type.
d.
Press Menu; the front panel displays the first in a menu of frame types.
Novell NetWare Configuration
Menu
until the front panel displays Network
Menu
4
(Exit); the printer
29
Setup Guide