Tektronix Phaser 740 Setup Manual page 55

5.
When prompted, do one of the following.
If you are using the printer's CD-ROM: Type the CD-ROM drive
location. Click OK; the Select Driver dialog box appears.
If you are using the printer's software for Windows diskette:
Type the diskette drive location. Click OK; the Select Driver
dialog box appears.
6.
Under Printer Driver, choose your printer from the list, then click OK.
N
O T E
If you are using older drivers, you get a series of Noncritical Errors stating
that Windows NT is unable to open the PSCRIPT.DLL file and the
PSCRIPT.DRV files. Click Ignore or update your driver.
7.
Under Print to, scroll to the end of the list and select Other; the Printer
port dialog box appears. Tektronix printers support two types of
network ports in Windows NT: LPR and AppleTalk. The next topic
covers LPR ports; for information on creating an AppleTalk port, see
"Creating an AppleTalk port" on page 50.
Creating an LPR port
1.
In the Printer Port dialog box, click the LPR port. If the LPR port is not
listed in the Printer Port dialog box, the Microsoft TCP/IP Printing
Service needs to be added to the Windows NT machine:
a.
In Control Panel, double-click Network; the Network Settings
dialog box appears.
b.
In Network Settings, click Add Software; the Add Network
Software dialog box appears.
c.
In the Add Network Software dialog box, click the drop-down
menu for Network Software. In the list, select TCP/IP Protocol
and Related Components, then click Continue; the TCP/IP
Installation dialog box appears.
d.
In the TCP/IP Installation dialog box, select TCP/IP Network
Printing Support. (Consult your Windows NT documentation for
information on other TCP/IP options.)
e.
Click Continue to install this service. The original Windows NT
distribution diskettes are needed during installation. To apply
these changes, restart Windows NT.
7
Windows NT
49
Setup Guide